Automatic pool cleaner Beatbot AquaSense 2

Beatbot AquaSense 2

is a premium automatic vacuum cleaner for pool owners who want

maximum purity without cables, without manual work and without compromises

. You simply put the robot in the water, select a mode and leave the rest to it - it systematically goes through the pool, cleans the most heavily loaded areas and at the end of the job

it will automatically surface and return to the edge of the pool

, so that you can easily remove it.

Wireless freedom and comfortable handling

AquaSense 2 is designed for comfort: no tangled cables, no pulling hoses. After pulling the robot out of the water

drains water automatically

, so handling is noticeably easier and cleaner.

Filtration that makes sense in practice

Dirt collects in

removable filter basket (2 l)

. After the cycle is complete, just open the top cover, remove the basket, empty and rinse – done and ready for the next ride.

Smart control + connectivity

The robot supports app control and wireless connection. In practice, you will also appreciate the fact that when the robot enters the water (and the Wi-Fi signal weakens) - after returning to the surface, the connection is restored again and the application synchronizes with the robot.

Key features

Fully automatic wireless

pool robot

Intelligent navigation

and sensors for efficient routing and obstacle avoidance

3 in 1 cleaning:

bottom, walls and water line (according to selected mode)

Up to 4 hours of operation

on one charge

Automatic parking at the edge of the pool

after cleaning is complete

Automatic water draining after pulling out

= easier handling

Filter basket 2 l

– quick removal and cleaning

App + Wi-Fi / Bluetooth

Resistance:

IP68 (robot)

,

IPX4 (charging dock)

Extended warranty 3 years

Intelligent navigation CleverNav™ – a robot that really knows where it is going. Smart move instead of random wandering.

Beatbot AquaSense 2 uses an advanced navigation system

CleverNav™

in combination with SonicSense™ technology and system

16 intelligent sensors

. During work, the robot actively maps the shape of the pool, analyzes the distances to walls and obstacles and accordingly

plans the optimal cleaning route

.

It doesn't run erratically or haphazardly. The bottom of the pool is cleaned in a systematic pattern in the shape

"S"

, while the walls and waterline in the pattern

"N"

, which ensures even coverage of the entire area without unnecessary crossings.

The result is:

no space left out

shorter cleaning time

lower energy consumption

a significantly better result than with "randomly running" robots

Wireless operation + automatic parking - absolute comfort without cables. No tangled cables, no pulling the robot off the bottom.

AquaSense 2 is

completely wireless

, which means real freedom of movement around the pool. Nothing slows it down, nothing limits its reach, nothing gets tangled up.

After the cleaning cycle is completed, the robot:

automatically floats to the surface

parks at the edge of the pool

it waits for you to conveniently take it out

The annoying "fishing for the robot" with a hook from the depth of the pool is eliminated. Moreover, thanks to the system

SmartDrain™

the robot will start when pulled out

drain water automatically

, so it is significantly lighter and easy to handle even with one hand.

Lasts up to 4 hours - one cycle is enough even for large pools. Non-stop performance, no compromises.

High capacity

Li-Ion battery 10,000 mAh

allows AquaSense 2 to work:

until

4 hours when cleaning the bottom

approx

3.5 hours when cleaning walls and water lines

This means that i

it can handle large pools in one single cycle

, no interruptions, no recharging in the middle of work.

The battery is controlled by an intelligent system that optimizes energy consumption according to the selected mode and ensures

constant performance throughout the cleaning period,

no "fading" at the end of the cycle.

Wireless docking charging - elegant, safe, practical. A premium solution that makes sense in everyday use.

AquaSense 2 is charged using

wireless docking station

. You simply store the robot in the dock - no connectors, no exposing the contacts to moisture, no complicated wiring.

Advantages of this solution:

higher security

longer contact life

clean and elegant solution without cable chaos

full charge approx

4 hours

The robot is thus always ready for the next cleaning, and the whole process looks as premium as the vacuum cleaner itself.

App control + OTA updates - a robot that learns. Review, overview and future improvements in one.

Beatbot AquaSense 2 can be connected to a mobile app

Beatbot

(Wi-Fi + Bluetooth), which will provide you with:

an overview of the cleaning progress

the possibility of choosing and combining modes

history of cleaning cycles

battery status information

Thanks

OTA updates (Over-The-Air)

with the robot over time

improves.

The manufacturer can optimize motion algorithms, performance or stability without the need for service. This means that AquaSense 2 is not a "finished product", but

long term investment

, which keeps up with you.

Technical parameters:

Robot working voltage:

21.6 V

Docking station power supply (input):

100-240 V, 50/60 Hz

Docking station output:

28 V ⎓ 3 A

Operating hours:

until

4 h

Charging time:

approx

4 h

(at 25 °C)

Battery (nominal capacity):

10,000 mAh

Li-Ion

Filter basket capacity:

2 l

Connectivity:

Wi-Fi + Bluetooth

Degree of coverage:

IP68 (robot)

/

IPX4 (dock)

Water conditions:

chlorine max.

4 ppm

, salt max.

5000 ppm

, pH

7.0-7.8

Working water temperature:

6–35 °