FLOC+C 20L

FLOC+C is a highly effective mixture of polymer flocculants and coagulants for clarification of pool water. FLOC+C FLOC+C is a highly efficient mixture of polymer flocculants and coagulant for pool water. It removes even the finest turbidity by closing it into solid flakes that are captured on the filter. High efficiency is the result of long -term development of Aseko. Use the Asin Aqua device for the correct dosage of FLOC+C. Dose: 10 - 100 ml per hour, dosage continuously using a slow -speed pump. 1 ml FLOC+C is injected at 1m 3 & nbsp; water that circulates with a filter. PH: Recommended PH water in the pool from 6.4 to 7.6. WARNING H290 - can be corrosive for metals. H319 - causes serious eye irritation. P101-If medical help is required, keep the product or label at hand. P102 - Keep out of reach of children. P103 - Read the label data before use. P234 - Keep only in the original packaging. P280 - Use protective glasses/facial shield. P305+P351+P338 - When you hit your eyes: Carefully rinse with water for a few minutes. Remove contact lenses if they are deployed and easily removed. Continue rinsing. P337+P313-if eye irritation persists: seek medical attention/treatment. P501 - Remove content/packaging in accordance with local regulations Active substances: & nbsp; Polyaluminium chlorite 10%, index number 008-003-00-9, CAS 1327-41-9 Form: & nbsp; Pure liquid Purpose of use: & nbsp; Floculation and pool water coagulation: & nbsp; 10 - 100 ml/hour (depending on the power of the filter pump) Application: & nbsp; Dosage by Asin Aqua storage and disposal: & nbsp; Store in close closed packaging on a dry, cool, well -ventilated place, protected from light, at a temperature of max. 25 ° C, the lowest permissible storage temperature is -10 ° C. Store out of reach of heat and petrol sources. To protect from a direct sunlight. The containers must be closed to allow internal pressure leakage. Keep out of reach of children