Heissner flow filtration set with pump 3300 l/h, UV 9W, up to 10 m³ FPU10100 - 00

Heissner pond filter system for clean and clear water in your pond. The Heissner company has more than 100 years of experience with filtration systems from pressure to flow and underwater filtration. Conveniently put together, fully equipped kits contain everything you need to keep your pond clean. You simply choose the filtration system according to the volume of your pond. Flow filtration set HEISSNER FPU10100 - 00 The flow set is designed for ponds up to 10 m³ without fish, 5 m³ with fish and 2.5 m³ with koi carp. It is a flow filtration with a multi-chamber filtration system with a high biological reach, you simply place the pump in the pond and connect it to the UV lamp placed on the filtration, which is located at the shore of the pond. Place the pump on the opposite side of the filter system so that the water circulates naturally. The water from the pond flows through individual chambers, where the water is treated mechanically from impurities using filter sponges, and at the same time biological cleaning occurs using filter bacteria settled in the filter media. After filtering, the discharge goes back into the pond. The set includes: a powerful adjustable filter pump (transports dirt up to 4 mm in diameter), a UV lamp against the formation of algae (9 W), a 5 m connecting hose (25 mm), and filter media (filter sponges of various coarseness, Japanese mat, houses for the settlement of bacteria). Advantages Pollution indicator (warning of the need for cleaning), built-in thermometer on the filter lid to determine the water temperature, easy cleaning of filter sponges - press and clean system. The UV lamp is equipped with an inspection window to verify the functionality of the UV lamp. Including filter media (filter sponges of different roughness, Japanese mat, houses for bacteria settlement) and connecting material. Tips The filter pump should run continuously. If the operation of the pump is interrupted, the bacteria settled in the filter inserts, which are used for biological cleaning of the pond, die. A constant supply of oxygen and hydration is required. Here, the emphasis is always on the low consumption of the pond pump. On the contrary, the UV lamp should not run 24 hours a day, so as not to kill the bacteria that we need for biological cleaning. In the months from May to September, we recommend turning on the UV lamp according to the degree of water pollution - visibility /see below/ - 20 cm for 24 hours - 60 cm for 10 hours - 30 cm for 22 hours - 70 cm for 5 hours - 40 cm for 20 hours - 80 cm for 3 hours - 50 cm for 15 hours > 80 cm - turn off From October to April, operation of the UV lamp is usually not necessary. When using the UV lamp for the first time, turn it on for a maximum of 4 hours a day to prevent the rapid loss of oxygen in the water caused by the death of algae. About 1 W of UV lamp power is calculated per 1000 l of water volume. Important rule: The maximum number of fish is given by the sum of their lengths, 20 cm of fish per 1000 l of water is recommended. cm pond hose 5 m diameter 25 mm filter material filter sponges of various coarseness, Japanese mat, houses for bacteria settlement Fastening material