Heissner PLUS set for building an ornamental pond 6.3 x 4 x 1.5 m (without fish) CFD4

The Heissner CFD 4 PLUS Set Ornamental Pond has never been more affordable. Thanks to a complete set of Heissner components, a swimming pool becomes a do-it-yourself dream - without expensive concreting and with quick construction. It will bring not only a water feature into your garden, but also a relaxation and decorative zone. The garden is our world. The Heissner brand has been taking care of the garden for over 150 years. All products are designed with long life, easy maintenance and minimal impact on the environment in mind. You can use our design to build a pond, or you can customize it according to the space available in your garden and according to your own requirements. It is only necessary not to exceed the maximum size, which is determined by the size of the pond film, which is 6.3 x 4 and up to 1.5 m deep. The set for the construction of an ornamental pond contains: a pond film, a protective pond geotextile under the film, a pond flow-through filtration system designed for fish farming, including filter media, bio houses for the settlement of pond bacteria, filter sponges for impurities, an adjustable pump with low coarseness consumption, UV lamp against the formation of algae, hose connections to connect the pump with filtration and pond hose. Annual set F - PLUS for improving and increasing the efficiency of filtration, accelerates the formation of beneficial bacteria. A floating skimmer with a built-in pump captures dirt floating on the surface. Pond lighting can be used in and out of the water, including replaceable colored lenses to change the color of the lighting. Planting baskets for aquatic plants. Adhesive for PVC foils for easy connection. Instructions with a proposal for building a pond. The operation of the swimming pool costs 1,200 - 1,900 CZK per year!!! Quick instructions for the construction process (you can find the detailed procedure in the attached detailed instructions): What you need: wheelbarrow (or mini-excavator), measuring stick, spade, shovel, spirit level, meter, garden hose, sand, large and small pebbles, decorative stones, pond plants and substrate. Determine the location: mark the outline of the pond using a garden hose, sand or spray. Excavate the soil along the marked pond and put it aside (good for final decoration). Start digging: create a muddy zone (0-15 cm), a coastal shallow zone (15-50 cm) and a deep zone (from 50 cm). The slope of the individual zones should not exceed 30°. Adjustment of the edges and the bank: all edges must be level - check with a measuring batten and spirit level. Use the soil from the excavation for leveling. Lay the geotextile and film: apply a 10 cm layer of sand on all surfaces, level and lay the geotextile. Then spread the foil from the center of the pit and pull it over the edge. Create a capillary seal with a groove filled with pebbles or gravel. Place the pump: put the pump on the opposite side of the filter system for natural water circulation. Route the hose and cables securely so that the pump does not shift. Fill the pond with water: after leveling the film, plant the plants, place the equipment and fill the pond with water. After 24 hours, cut off the overhanging film and finish the edges with decorative stones. Video instructions for connecting and maintaining the filtration: Video instructions for building the pond: