Automatické dávkování chemie

With a constant flow with the possibility of power control, designed for the automatic dosing station K800

Peristaltic pump with a flow of up to 10 l/h

Analog peristaltic dosing pump Seko - it is a pump for the K800 automatic dosing station. The assembly contains a seal. pump and connecting fitting. Reducing the amount of dosed chemicals with a peristaltic pump - thanks to the replacement of the original hose 6x10 for a tube with 3x7 (S9900106234). Power supply: 230 VAC 50/60 Hz Pump flow: 1.5 l/h Covering: IP65 Dosage method: on/off & nbsp; & nbsp;

Aquatouch+ is one of the latest generation of stations for control, modification and monitoring of drinking and pool water

Babysitting of chemical levels in the container including suction basket is designed for SEKO dosing systems

The system suitable for private pool operations-a combination of ozone and low-pressure UV-C lamps ensures hygienically secure and clean pool water with minimal need for chlorine disinfection. Main function The unit provides three disinfection: ozone, oh radicals and UV-C Up to 35 % higher UV-C yield as a result of reflection 100% efficient and stable operation Stainless steel duplex, suitable for use in pools with salt water using electrolysis Unit operation-ozone production approx. 4 500 h/UV-C approx. 9 000 hours Automatic Operation Control - Indications of Lamp Replacement Easy installation and maintenance Special UV-C lamp generates radiation both 254nm and 185nm. 185nm radiation converts the available oxygen into ozone. The ozone produced (max. 0.6 g/h) is mixed with water (via venturi tube) to make disinfection/oxidation. Inside the UV-C housing, all residual ozone will be converted by 254nm UV-C radiation to the Oxidation Process, which have an even stronger oxidation force than ozone. Principle of functioning AOP unit The advanced oxidation process (AOP) is currently the best available water treatment technology. AOP uses for water treatment with significantly higher oxidation potential compared to other oxidants. When the dissolved ozone (1) is irradiated by UV radiation in the reactor (2), then the radicals arise. The lifetime of the OH-radicals is extremely short, the entire processing process is inside the reactor, the treated water (3) is without OH-Radicals. AOP & nbsp; combines the benefits of ozone and UV-C into one device. When using ozone in combination with UV-C, so-called "hydroxyl radicals (OH-) & quot; which are very effective in water oxidation, ie they reduce organic pollution in water and also reduce chlorine disinfection products (such as THM and chloamins). Not only does it disinfect water, it reduces chloramines in water, but also destroys the residual ozone in the water. ​ Technical data: Lamp performance: 75 W Recommended flow (30 MJ/cm & SUP2;): 18 M & SUP3;/H Max. Pressure: 2 bar Max. Flow: 23 M & SUP3;/H Unit diameter: 70 mm Unit length: 100 cm Connection (input/ output): 63 mm/ 50 mm/ 1 & FRAC12; & ldquo; Body Material: & nbsp; stainless steel duplex Power: 230 V AC 50/60 Hz Max. current: 0.57 and Lamp type: VGE T5 75W Ozone Lamp life: 4 500 h/ozone | 9,000 h/UV-C Ozone production: 0.6 g/h & nbsp;

Peristaltic dosing pump

Peristaltic pump with a flow of up to 10l/h

Allows dosing depending on time, the pump is particularly suitable for dosing a flocculant

Measures ORP, contains: ORP probe, calibration solutions, dosing magnetic pump, injection valve, suction basket

Measures PH+/ph-, contains: probe of pH, calibration solutions, dosing magnetic pump, injection valve, suction basket

Measures pH or ORP, doses pH +/- or hypochlorite, only dosing pump without probes

Allows dosing depending on time, dosing any pool chemistry

Suitable for time dosing of chemistry such as a flocculant

Pump output up to 4.5 l/h

Accessories to a monitoring and dosing station

With a constant flow with the possibility of power control, designed for the automatic dosing station K800

Peristaltic pump with a flow of up to 10l/h

Analog pump-dosing 0-100% / 0-20%

With a constant flow with the possibility of power control, designed for the automatic dosing station K800