Tepelná čerpadla, odvlhčovače

Additional heating Fairland DH90-120.

Additional Fairland DH60 dehumidifier.

Cover for 15kW and 18kW heat pumps - Protection and long life Protect your heat pump after the bathing season from adverse weather, dust and dirt with our quality cover for 15kW and 18kW heat pumps. Our cover is designed to provide optimal protection and extend the life of your device. It is made of durable materials that withstand extreme conditions. Our cover provides effective protection against rain, snow, UV radiation and mechanical damage. Advantages of our cover for 15kW and 18kW heat pumps: High resistance: Resistant to weather, UV radiation and mechanical damage. Easy installation: The cover is designed to be easily placed on the 15kW and 18kW heat pumps. It closes with two straps at the bottom. Aesthetic appearance: The cover has a modern design that fits any exterior. Extended service life: Protection against external influences ensures long-term and efficient operation of your equipment. Invest in quality protection and ensure a long and trouble-free service life for your heat pump. Cover dimensions for 15kW and 18kW heat pumps: 104.75x45, 30x77.05 cm

Cover for heat pump 24kW - Protection and long life Protect your heat pump after the swimming season from adverse weather, dust and dirt with our quality cover for heat pump 24kW. Our cover is designed to provide optimal protection and extend the life of your device. It is made of durable materials that withstand extreme conditions. Our cover provides effective protection against rain, snow, UV radiation and mechanical damage. Advantages of our 24kW heat pump cover: High durability: Resistant to weather, UV radiation and mechanical damage. Easy installation: The cover is designed to be easily placed on the 24kW heat pump. It closes with two straps at the bottom. Aesthetic appearance: The cover has a modern design that fits any exterior. Extended service life: Protection against external influences ensures long-term and efficient operation of your equipment. Invest in quality protection and ensure a long and trouble-free service life for your heat pump. Cover dimensions for heat pump 24kW: 116.1x49.0x86.8 cm

Cover for heat pump 8kW - Protection and long life Protect your heat pump after the swimming season from adverse weather, dust and dirt with our quality cover for heat pump 8kW. Our cover is designed to provide optimal protection and extend the life of your device. It is made of durable materials that withstand extreme conditions. Our cover provides effective protection against rain, snow, UV radiation and mechanical damage. Advantages of our 8kW heat pump cover: High durability: Resistant to weather, UV radiation and mechanical damage. Easy installation: The cover is designed to be easily placed on the 8kW heat pump. It closes with two straps at the bottom. Aesthetic appearance: The cover has a modern design that fits any exterior. Extended service life: Protection against external influences ensures long-term and efficient operation of your equipment. Invest in quality protection and ensure a long and trouble-free service life for your heat pump. Cover dimensions for heat pump 8kW: 80.1x31.5x49.0 cm

Cover for 3kW and 5kW heat pumps - Protection and long life Protect your heat pump after the bathing season from adverse weather, dust and dirt with our quality cover for 3kW and 5kW heat pumps. Our cover is designed to provide optimal protection and extend the life of your device. It is made of durable materials that withstand extreme conditions. Our cover provides effective protection against rain, snow, UV radiation and mechanical damage. Advantages of our cover for 3kW and 5kW heat pumps: High resistance: Resistant to weather, UV radiation and mechanical damage. Easy installation: The cover is designed to fit easily on 3kW and 5kW heat pumps. It closes with two straps at the bottom. Aesthetic appearance: The cover has a modern design that fits any exterior. Extended service life: Protection against external influences ensures long-term and efficient operation of your equipment. Invest in quality protection and ensure a long and trouble-free service life for your heat pump. Cover dimensions for 3kW and 5kW heat pumps: 35x42x38 cm

Cover for heat pumps 9kW and 12kW - Protection and long life Protect your heat pump after the bathing season from adverse weather, dust and dirt with our quality cover for heat pumps 9kW and 12kW. Our cover is designed to provide optimal protection and extend the life of your device. It is made of durable materials that withstand extreme conditions. Our cover provides effective protection against rain, snow, UV radiation and mechanical damage. Advantages of our cover for 9kW and 12kW heat pumps: High resistance: Resistant to weather, UV radiation and mechanical damage. Easy installation: The cover is designed to fit easily on 9kW and 12kW heat pumps. It closes with two straps at the bottom. Aesthetic appearance: The cover has a modern design that fits any exterior. Extended service life: Protection against external influences ensures long-term and efficient operation of your equipment. Invest in quality protection and ensure a long and trouble-free service life for your heat pump. Cover dimensions for 9kW and 12kW heat pumps: 93.5x37.5x60.8 cm

Heat pump Planet Pool CF PROFI 8kW The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump in its category on the market - very quiet operation will be appreciated not only by you, but also by your neighbors. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool and your house. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: heat pump for efficient heating of pool water up to 35 m3 heating output 7.8 kW power input 1.38 kW heating factor COP (efficiency) 5.64 heating and cooling very low noise 51 dB (noise at the level of a normal refrigerator) recommended water flow 2.2 m3/environmental refrigerant R32 possibility of connection ø38/32 mm hose or ø50 mm PVC pipe function defrosting of the evaporator LED display Wi-Fi control using a mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43℃ Water temperature: 9 - 40℃ Power supply: single-phase, 220 - 240 V / 50 Hz The heat pump is not equipped with terminals for controlling the operation of an external pump, e.g. a filter unit. Connection to WI - FI - WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clips 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass for flow regulation

Heat pump CF MINI 3kW The heat pump is intended for economical heating of water in swimming pools and hot tubs even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other options for heating water in pools and hot tubs, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump in its category on the market - very quiet operation will be appreciated not only by you, but also by your neighbors. The evaporator defrost function further increases the efficiency of the pump. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool or hot tub and your house. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already completely assembled and ready to be connected to the pool hoses ø38/32 mm. Parameters: heat pump for efficient water heating in swimming pools and hot tubs up to 15 m3 heating power 3 kW power input 0.62 kW heating factor COP (efficiency) 4.84 very low noise level 48 dB (noise level at the level of an ordinary refrigerator) recommended water flow 1 m3/environmental refrigerant R32 possibility of connection ø38/32 mm hose integrated current protector defrosting function vaporizer LED display Wi-Fi control using a mobile application damping rubber feet Operating range: Ambient temperature: 10 - 43℃ Water temperature: 15 - 40℃ Power supply: single-phase, 220 - 240 V / 50 Hz Connection to WI - FI - WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 38/32 mm connectors 4x damping rubber feet 2x hose clips 1x Teflon tape instructions Recommended accessories: pool hoses, three-valve bypass for flow regulation

Heat pump CF MINI 5kW The heat pump is designed for economical heating in swimming pools and hot tubs even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other options for heating water in pools and hot tubs, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump in its category on the market - very quiet operation will be appreciated not only by you, but also by your neighbors. The evaporator defrost function further increases the efficiency of the pump. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool or hot tub and your house. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already completely assembled and ready to be connected to the pool hoses ø38/32 mm. Parameters: heat pump for efficient water heating in swimming pools and hot tubs up to 23 m3 heating power 5 kW power input 0.98 kW heating factor COP (efficiency) 5.10 very low noise 50 dB (noise at the level of an ordinary refrigerator) recommended water flow 1.8 m3/environmental refrigerant R32 possibility of connection ø38/32 mm hose integrated current protector function evaporator defrost LED display Wi-Fi control using a mobile application damping rubber feet Operating range: Ambient temperature: 10 - 43℃ Water temperature: 15 - 40℃ Power supply: single-phase, 220 - 240 V / 50 Hz Connection to WI - FI - WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 38/32 mm connectors 4x damping rubber feet 2x hose clips 1x Teflon tape instructions Recommended accessories: pool hoses, three-valve bypass for flow regulation

Heat pump CF PROFIInvertor 12kW The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical choice. Most of the thermal energy transferred to the water is obtained from the surrounding air, and electricity from the network is used only for the operation of the device. In addition to financial resources, you are also saving our planet. The quietest heat pump on the market - not only you, but also your neighbors will appreciate the super quiet operation. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in any color, the pump blends in perfectly with the pool and your house. The heat pump is equipped with modern inverter technology, thanks to which the pump automatically smoothly regulates the output. This function allows the pump to heat and maintain the water temperature in the pool as efficiently as possible. Most of the time it runs only at low - medium power, which consequently means lower operating costs, high efficiency, extremely quiet operation and significantly longer service life of individual components. Can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the introduction). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: inverter heat pump for efficient heating of pool water up to 60 m3 heating power 11.5 kW input 0.3~1.9 kW heating factor COP (efficiency) 6.0~10.4 heating and cooling super low noise level 42~53 dB (noise level between a whisper and a refrigerator) recommended water flow 3.2 m3/environmental refrigerant R32 possibility of connection ø38/32 mm hose or ø50 mm PVC pipe evaporator defrost function LED display Wi-Fi control via mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43℃ Water temperature: 9 - 40℃ Power supply: single phase, 220 - 240 V /50 Hz The heat pump is equipped with terminals for controlling the operation of an external pump, e.g. filter unit. The terminals can be loaded with a current of up to 6 A. Connection to WI - FI - The WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clamps 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass (bypass) for flow regulation Aqua temp APP

The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you also save our planet. The quietest heat pump on the market - super quiet operation will be appreciated not only by you, but also by your neighbors. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool and your house. The heat pump is equipped with modern inverter technology, thanks to which the pump automatically smoothly regulates the output. This function allows the pump to heat and maintain the temperature of the pool water as efficiently as possible. Most of the time it runs only at low - medium power, which means lower operating costs, high efficiency, extremely quiet operation and a significantly longer service life of individual components. PV READY Thanks to this function, the heat pump can be connected to the photovoltaic system and thus maximize the use of the produced electricity. energy. Users who have installed photovoltaics and do not have a PV - READY TČ will have the excess electricity produced flow into the network = at low purchase prices. If this user wants to use electricity at night or when the production from photovoltaics is not sufficient, he has to use electricity from the grid, i.e. electricity at a higher price. But if it has a PV - READY TČ, then the excess el. the energy is converted into heat and thus stored in the pool water. The water heater automatically increases the target water heating temperature and heats the pool to a higher temperature. This results in significant savings. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: inverter heat pump for efficient heating of pool water up to 60m3 heating power 11.5kW input 0.25~1.92kW heating factor COP (efficiency) 6.0~10.4 heating and cooling super low noise 42~53 dB (noise level between a whisper and a refrigerator) recommended water flow 3.2 m3/eco-friendly coolant R32 connection option ø38/32 mm hose or ø50 mm PVC pipe evaporator defrost function LED display Wi - Fi control via mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43 ℃ Water temperature: 9 - 40 ℃ Power supply: single phase, 220 - 240 V / 50 Hz The heat pump is equipped with terminals for controlling the operation of an external pump, e.g. filter units. The terminals can be loaded with a current of up to 6 A. Connection to WI - FI - The WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clamps 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass (bypass) for flow regulation Aqua temp APP

The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump on the market - not only you, but also your neighbors will appreciate the super quiet operation. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool and your house. The heat pump is equipped with modern inverter technology, thanks to which the pump automatically smoothly regulates the output. This function allows the pump to heat and maintain the temperature of the pool water as efficiently as possible. Most of the time it runs only at low - medium power, which means lower operating costs, high efficiency, extremely quiet operation and a significantly longer service life of individual components. PV READY Thanks to this function, the heat pump can be connected to the photovoltaic system and thus maximize the use of the produced electricity. energy. Users who have installed photovoltaics and do not have a PV - READY TČ will have the excess electricity produced flow into the network = at low purchase prices. If this user wants to use electricity at night or when the production from photovoltaics is not sufficient, he has to use electricity from the grid, i.e. electricity at a higher price. But if it has a PV - READY TČ, then the excess el. the energy is converted into heat and thus stored in the pool water. The water heater automatically increases the target water heating temperature and heats the pool to a higher temperature. This results in significant savings. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: inverter heat pump for efficient heating of pool water up to 65m3 heating power 15.5kW power input 0.5~2.63kW heating factor COP (efficiency) 5.6~10.1 heating and cooling super low noise 44~55 dB (noise level between a whisper and a refrigerator) recommended water flow 5.1 m3/eco-friendly coolant R32 connection option ø38/32 mm hose or ø50 mm PVC pipe evaporator defrost function LED display Wi - Fi control via mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43 ℃ Water temperature: 9 - 40 ℃ Power supply: single phase, 220 - 240 V / 50 Hz The heat pump is equipped with terminals for controlling the operation of an external pump, e.g. filter units. The terminals can be loaded with a current of up to 6 A. Connection to WI - FI - The WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clamps 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass (bypass) for flow regulation Aqua temp APP

The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump on the market - not only you, but also your neighbors will appreciate the super quiet operation. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool and your house. The heat pump is equipped with modern inverter technology, thanks to which the pump automatically smoothly regulates the output. This function allows the pump to heat and maintain the temperature of the pool water as efficiently as possible. Most of the time it runs only at low - medium power, which means lower operating costs, high efficiency, extremely quiet operation and a significantly longer service life of individual components. PV READY Thanks to this function, the heat pump can be connected to the photovoltaic system and thus maximize the use of the produced electricity. energy. Users who have installed photovoltaics and do not have a PV - READY TČ will have the excess electricity produced flow into the network = at low purchase prices. If this user wants to use electricity at night or when the production from photovoltaics is not sufficient, he has to use electricity from the grid, i.e. electricity at a higher price. But if it has a PV - READY TČ, then the excess el. the energy is converted into heat and thus stored in the pool water. The water heater automatically increases the target water heating temperature and heats the pool to a higher temperature. This results in significant savings. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: inverter heat pump for efficient heating of pool water up to 75m3 heating power 18.4kW input 0.52~3.17kW heating factor COP (efficiency) 5.8~10.0 heating and cooling super low noise 44~56 dB (noise level between a whisper and a refrigerator) recommended water flow 5.1 m3/eco-friendly coolant R32 connection option ø38/32 mm hose or ø50 mm PVC pipe evaporator defrost function LED display Wi - Fi control via mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43 ℃ Water temperature: 9 - 40 ℃ Power supply: single phase, 220 - 240 V / 50 Hz The heat pump is equipped with terminals for controlling the operation of an external pump, e.g. filter units. The terminals can be loaded with a current of up to 6 A. Connection to WI - FI - The WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clamps 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass (bypass) for flow regulation Aqua temp APP

The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump on the market - not only you, but also your neighbors will appreciate the super quiet operation. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool and your house. The heat pump is equipped with modern inverter technology, thanks to which the pump automatically smoothly regulates the output. This function allows the pump to heat and maintain the temperature of the pool water as efficiently as possible. Most of the time it runs only at low - medium power, which means lower operating costs, high efficiency, extremely quiet operation and a significantly longer service life of individual components. PV READY Thanks to this function, the heat pump can be connected to the photovoltaic system and thus maximize the use of the produced electricity. energy. Users who have installed photovoltaics and do not have a PV - READY TČ will have the excess electricity produced flow into the network = at low purchase prices. If this user wants to use electricity at night or when the production from photovoltaics is not sufficient, he has to use electricity from the grid, i.e. electricity at a higher price. But if it has a PV - READY TČ, then the excess el. the energy is converted into heat and thus stored in the pool water. The water heater automatically increases the target water heating temperature and heats the pool to a higher temperature. This results in significant savings. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: inverter heat pump for efficient heating of pool water up to 105m3 heating power 24.0kW input 0.36~4.0kW heating factor COP (efficiency) 6.0~13.0 heating and cooling super low noise 45~56 dB (noise level between a whisper and a refrigerator) recommended water flow 10.0 m3/eco-friendly coolant R32 connection option ø38/32 mm hose or ø50 mm PVC pipe evaporator defrost function LED display Wi - Fi control via mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43 ℃ Water temperature: 9 - 40 ℃ Power supply: single phase, 220 - 240 V / 50 Hz The heat pump is equipped with terminals for controlling the operation of an external pump, e.g. filter units. The terminals can be loaded with a current of up to 6 A. Connection to WI - FI - The WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clamps 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass (bypass) for flow regulation Aqua temp APP

Heat pump CF PROFIInvertor 9kW The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump on the market - not only you, but also your neighbors will appreciate the super quiet operation. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool and your house. The heat pump is equipped with modern inverter technology, thanks to which the pump automatically smoothly regulates the output. This function allows the pump to heat and maintain the temperature of the pool water as efficiently as possible. Most of the time it runs only at low - medium power, which means lower operating costs, high efficiency, extremely quiet operation and a significantly longer service life of individual components. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: inverter heat pump for efficient heating of pool water up to 45 m3 heating power 9kW input 0.3~1.55kW heating factor COP (efficiency) 5.8~10.0 heating and cooling super low noise level 40~52 dB (noise level between a whisper and a refrigerator) recommended water flow 2.8 m3/environmental refrigerant R32 possibility of connection ø38/32 mm hose or ø50 mm PVC pipe evaporator defrost function LED display Wi-Fi control via mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43℃ Water temperature: 9 - 40℃ Power supply: single phase, 220 - 240 V /50 Hz The heat pump is equipped with terminals for controlling the operation of an external pump, e.g. filter unit. The terminals can be loaded with a current of up to 6 A. Connection to WI - FI - The WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clamps 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass (bypass) for flow regulation Aqua temp APP

The heat pump is intended for economical heating of pool water even when the sun is not shining. It significantly extends the bathing season, especially in the months before and after the summer season. It can be easily and intuitively controlled using the LED display or remotely via a mobile application that can be freely downloaded from Google Play or the App Store. Compared to other pool water heating options, a heat pump is the most economical option. It obtains most of the heat energy transferred to the water from the surrounding air and uses electricity from the network only to run the device. In addition to financial resources, you are also saving our planet. The quietest heat pump on the market - not only you, but also your neighbors will appreciate the super quiet operation. The automatic evaporator defrost function further increases pump efficiency and reduces electricity consumption. In addition to the water heating mode, the cooling mode can also be set. Thanks to the maintenance-free cover in gray color, the pump blends in with the surroundings of the pool and your house. The heat pump is equipped with modern inverter technology, thanks to which the pump automatically smoothly regulates the output. This function allows the pump to heat and maintain the temperature of the pool water as efficiently as possible. Most of the time it runs only at low - medium power, which means lower operating costs, high efficiency, extremely quiet operation and a significantly longer service life of individual components. PV READY Thanks to this function, the heat pump can be connected to the photovoltaic system and thus maximize the use of the produced electricity. energy. Users who have installed photovoltaics and do not have a PV - READY TČ will have the excess electricity produced flow into the network = at low purchase prices. If this user wants to use electricity at night or when the production from photovoltaics is not sufficient, he has to use electricity from the grid, i.e. electricity at a higher price. But if it has a PV - READY TČ, then the excess el. the energy is converted into heat and thus stored in the pool water. The water heater automatically increases the target water heating temperature and heats the pool to a higher temperature. This results in significant savings. It can be used for heating water treated with chlorine preparations and salination (limit values ​​given in the instructions). The heat pump can be easily put into operation, it is already ready for connection to pool hoses ø38/32 mm or pool pipes ø50 mm. Parameters: inverter heat pump for efficient heating of pool water up to 45m3 heating power 9kW power input 0.24~1.55kW heating factor COP (efficiency) 5.8~10.0 heating and cooling super low noise 40~52 dB (noise at the level between a whisper and a refrigerator) recommended water flow 2.8 m3/environmental refrigerant R32 possibility of connection ø38/32 mm hose or ø50 mm PVC pipe evaporator defrost function LED display Wi-Fi control via mobile application damping rubber feet Operating range: Ambient temperature: - 7 – 43℃ Water temperature: 9 - 40℃ Power supply: single phase, 220 - 240 V /50 Hz The heat pump is equipped with terminals for controlling the operation of an external pump, e.g. filter unit. The terminals can be loaded with a current of up to 6 A. Connection to WI - FI - The WI - FI module works only in the 2.4 GHz frequency band. For a mobile device with the Aqua Temp application installed, make sure that the mobile works in the 2.4 GHz band before the network setup procedure. Package contents: heat pump 2x 50 mm connectors 2x 38/32 mm connectors 4x damping rubber feet 2x hose clamps 1x Teflon tape 1x condensate drain kit instructions Recommended accessories: pool hoses/pipes, three-valve bypass (bypass) for flow regulation Aqua temp APP

Fairland inverter heat pump, Cooling: yes , Recommended pool volume: 65 - 105 m3, Connection: 50 mm, Refrigerant used: R32 , Voltage: 230 V, Efficiency: up to 20.0 C.O.P., SCOP: 8.7