Chemaform chemie

Liquid chemistry suitable for dosing stations

Algalicides are always a prevention of the appearance of algae, so their regular use is necessary. They prevent the multiplication and growth of algae spores. Algicis Standard is a product with reduced foaming, highly effective. Against grown algae, the use of an algicide is no longer sufficient, it is always necessary to carry out a chlorine shock!! Use biocidal products safely. Always read the information on the package and the attached product information before use.

Algex, liquid preparation slightly foamy, preventing eyelash formation

It is used to stabilize pH, increases the efficiency of chlorine, used even in flawless modifications

Preparation to increase the acid neutralizing capacity of water. It stabilizes the bicarbonate hardness, thereby stabilizing the pH value. An indicator of low alkalinity is a low pH value or pH fluctuations. Optimal alkalinity (chemically correct alkalinity) is 80 - 120 ppm.

for removing extreme organic dirt on vertical surfaces. the slightly viscous liquid concentrate turns into a gel consistency after mixing with water in a ratio of 1:10 to 1:20.

Pool water oxygen care in liquid form. Suitable for application using automatic dispenses.

Ideal pH value: 7.0 - 7.4. Ideal oxygen value: 5.0 - 8.0 ppm. The activator starts the disinfection reaction by adding to the oxygen disinfectants. It is referred to as component 2. Although it does not contain oxygen, it is an integral part of the oxygen treatment of pool water. Use biocides safely. Always read the label and product information before use.

Granule intended for shock and continuous treatment of pool water. The disinfection reaction is triggered exclusively by the addition of the Activator (component 2), therefore these components must always be used together according to the instructions. Use biocides safely. Always read the label and product information before use.

with a well-balanced dirt-dissolving composition; a special mixture of acids together with anti-corrosion protection efficiently removes extreme mineral impurities and deposits.

Tablets with multiple effects. They are composed of three main components - chlorine disinfection, algicidal substances and flocculants. It is used for long-term maintenance of the pool. Chlorine eliminates bacteria and viruses, decomposes unwanted substances, algaecide prevents the growth of algae, and the flocculant precipitates microscopic pollution into flakes capable of being caught on ordinary filter devices. They are suitable for small pools (Tampa). Use biocides safely. Always read the label and product information before use.

Chlorine eliminates bacteria and viruses, decomposes unwanted substances, algaecide prevents the growth of algae, and the flocculant precipitates microscopic pollution into flakes capable of being caught on ordinary filter devices. They are suitable for small pools (Tampa). Use biocides safely. Always read the label and product information before use.

Just a few drops will transform your pool into a sparkling clean, sparkling blue lagoon. The special polymer formula immediately agglomerates microscopic impurities that would otherwise slip through the filter.

for removing light organic soiling from all surfaces sensitive to acids and bases.

It removes all firmly settled dirt from the pool walls, scale, rust and attached layers of algae. It is very economical, it is diluted 1: 3 - 1: 10. It contains phosphoric and hydrochloric acid, so make sure that the product does not get on the marble parts around the pool. When cleaning, always apply the product to the surface and leave it on for a short time so that the product has enough time to loosen the dirt.

This preparation is irreplaceable in cases where, in addition to the standard line at the water level, dirt settles in various corners of the pool, for example on steps or in corners. Thanks to its strong density, the product stays on the sponge for the duration of underwater cleaning. Excellent combination of two effective acids, high efficiency.

The preparation is suitable for swimming pools or whirlpools. For smaller areas, we recommend using a spray head and spraying on the surface of the water. This product is also suitable as an additive to cleaning products for cleaning machines.

proven for cleaning and care of stainless steel surfaces in swimming pools, industry and commerce. Effortlessly removes corrosion and protects surfaces. Ferroclin is used and recommended by leading European manufacturers of stainless steel pools.

The cleanliness and permeability of the filtration is one of the most important prerequisites for perfect water maintenance. The best equipment or chemical treatment ceases to work if the filter equipment is not able to work at full capacity. Therefore, it is necessary to regularly check the cartridge filters or rinse the filling of the filter container. The filter cartridge has a limited lifespan, think about its regular replacement!

Liquid pool chemical preparations for automatic dispenser