Hanscraft chemicals

HANSCRAFT POOL - ALGI STRONG Preparation in liquid form for the prevention and elimination of algae in pool water. How to use: Dose the product into the pool with the filtration running. After filling the pool, apply the initial dose. If there is still visible growth of algae, use shock disinfectants (chlorine or chlorine-free) to eliminate them and repeat the initial dose of ALGI STRONG 48 hours after mechanically removing the remains of algae from the pool. As soon as there are no visible algae in the pool, start using a maintenance dose once every 7 days. Dosage: initial dose - 30 ml per 1 m3 of water maintenance dose - 10 ml per 1 m3 of water Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT POOL - Hardness regulator The product is designed to stabilize water hardness. Use of the product: In the case of hard water (above 18 °N, German scale) or an increased content of heavy metals in the water (local source - well), dissolved calcium, magnesium and other salts are leached from the water, on which impurities are packed and a suitable ground is created for the growth of bacteria, algae and viruses. The hardness regulator acts as an inhibitor of water hardness, prevents the formation of deposits on the walls and bottom of the pool and at the same time binds calcium, magnesium, iron and manganese ions. Method of use: The product is dosed when the pool is filled and then every time it is refilled. Dosage: When filling the pool, 20-50 ml/m3 of water depending on the hardness. During regular operation (when adding water) 25-50 ml/m3 of fresh water. Always follow the information on the product label.

HANSCRAFT POOL-MULTI tablets 6 in 1 Tablets (à 200 g) is a modern multi-purpose preparation for all-season continuous maintenance of water in all types of swimming pools. Eliminates bacteria and algae, prevents their growth, enables flocculation of impurities, stabilizes active chlorine and water hardness, clarifies (improves filtration efficiency). Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT SWIMMING POOL - pH minus / granulate Preparation for adjusting the pH values ​​of pool water - reduction. Use of the product: For the greatest effect of chlorine without side effects, it is necessary to adjust the pH value of the pool water to 6.8 - 7.6. At values ​​above 7.6, turbidity may occur in the water, which will subsequently cause filter clogging. Furthermore, the effectiveness of disinfectants may decrease, you can smell a strong chlorine smell, and irritation of the eyes and skin may occur. In this case, it is necessary to use the product BAZÉN pH minus to treat the water and reduce the pH value. Method of use: The product is dissolved in water and poured into the pool with the filter device turned on, and it lowers the pH value. The pH must be checked at least once a week using a test kit. Dosage: To reduce the pH value by 0.2, dose 15 g/m3 of water (1 level tablespoon). Always follow the information on the product label.

HANSCRAFT SWIMMING POOL - pH minus / granulate Preparation for adjusting the pH values ​​of pool water - reduction. Use of the product: For the greatest effect of chlorine without side effects, it is necessary to adjust the pH value of the pool water to 6.8 - 7.6. At values ​​above 7.6, turbidity may occur in the water, which will subsequently cause filter clogging. Furthermore, the effectiveness of disinfectants may decrease, you can smell a strong chlorine smell, and irritation of the eyes and skin may occur. In this case, it is necessary to use the product BAZÉN pH minus to treat the water and reduce the pH value. Method of use: The product is dissolved in water and poured into the pool with the filter device turned on, and it lowers the pH value. The pH must be checked at least once a week using a test kit. Dosage: To reduce the pH value by 0.2, dose 15 g/m3 of water (1 level tablespoon). Always follow the information on the product label.

HANSCRAFT SWIMMING POOL - pH plus / granulate Preparation for adjusting the pH values ​​of pool water - increase. Use of the product: The recommended pH value of pool water is in the range of 6.8 - 7.6. In this range, the greatest effect of chlorine is given without side effects. The pleasant sensation when bathing, the correct function of the device, etc. depends on the pH value. The pH must be checked at least once a week using a test kit. At a pH below 6.8, there may be increased corrosion of metal and concrete, fading of the pool and also eye and skin irritation. Method of use: The product is dosed to increase the pH value to the range of 6.8 - 7.6. After dissolving in the container, it is dosed directly into the pool with the filter device turned on. tablespoon).Always follow the information on the product label.

HANSCRAFT POOL - pH plus / granulate Preparation for adjusting the pH values of pool water - increase. Use of the product: The recommended pH value of pool water is in the range of 6.8-7.6. In this range, the greatest action of chlorine is given without side effects. The pleasant sensation when bathing, the correct function of the device, etc. depends on the pH value. The pH must be checked at least once a week using a test kit. At a pH below 6.8, there may be increased corrosion of metal and concrete, fading of the pool and also eye and skin irritation. Method of use: The preparation is dosed to increase the pH value to the value range of 6.8-7.6. After dissolving in the container, it is dosed directly into the pool with the filter device switched on. Dosage: To increase the pH value by 0.2, the dose is 10 g/m3 of water (1 level tablespoon).

HANSCRAFT POOL - POOL WINTERIZATION - 1 l The preparation is intended for winterizing swimming pools. It works against the formation of algae, bacteria and calcium deposits in the pool water. Use of the product: The use of the mentioned preparation will facilitate the start of spring operation of the pool. The disinfectant and algicidal (anti-algae) effect of the preparation ensures the preservation of pool water during the winter season. ATTENTION: The product does not prevent water from freezing! Method of use: The preparation is poured into the pool without dilution, the water is allowed to mix properly, then the water level is lowered, the pool accessories are removed and the pool is covered with foil. Deposits that occur after draining the water should be cleaned with SPRAY CLEANER. Dosage: 500 ml of preparation / 10 m3 of water. Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT POOL - SHOCK Chlorine / granulate Shock - rapid disinfection of pool water, when the pool is put into operation, under extreme operating conditions (high water temperature, large number of people in the pool, excessive use of the pool, storms, etc.). Use of the product: When using chlorine products, chlorine is released and the pool water is disinfected. furthermore, the microorganisms present, such as algae and bacteria, are eliminated. Bathers release impurities from their skin, sun creams, etc. into the pool. Furthermore, impurities from the external environment (dust, pollen, spores, etc.) fall into the pool. All dirt in the pool supports the growth of bacteria and algae, so it is necessary to pay attention to regular disinfection and maintenance. Method of use: Dispense directly into the pool after dissolving in the container or in the skimmer with the filtration on. Frequency of use: When filling the pool, a quick shock dose - 10 g/m3 of water (1 level tablespoon). During regular operation - 5 g/m3 of water (1 teaspoon). Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT POOL - SHOCK Chlorine / granulate Shock - quick disinfection of pool water, when the pool is put into operation, under extreme operating conditions (high water temperature, large number of people in the pool, excessive use of the pool, storms, etc.). Use of the product: When using chlorine products, chlorine is released and the pool water is disinfected. furthermore, the microorganisms present, such as algae and bacteria, are eliminated. Bathers release impurities from their skin, sun creams, etc. into the pool. Furthermore, impurities from the external environment (dust, pollen, spores, etc.) fall into the pool. All dirt in the pool supports the growth of bacteria and algae, so it is necessary to pay attention to regular disinfection and maintenance. How to use: Dispense directly into the pool after dissolving in the container or in the skimmer with the filtration on. Frequency of use: When filling the pool, a quick shock dose - 10 g/m3 of water (1 level tablespoon). For regular use - 5 g/m3 of water (1 teaspoon). Always follow the information on the product label. Use biocides in a safe way. Always read the label and product information before use.

HANSCRAFT SPA - ALGI SPA Preparation in liquid form for the prevention and elimination of algae in water. Method of use: Dose the preparation into the hot tub with the filtration running. After filling the hot tub, apply the initial dose. If there is still visible algae growth, use shock disinfectants (chlorine or chlorine-free) to eliminate them. 48 hours after mechanically removing algae remains from the hot tub, repeat the addition of the initial dose of ALGI SPA. As soon as there are no visible algae in the hot tub, start using a maintenance dose once every 7 days. Dosage: Initial dose - 30 ml of product per 1 m3 of water. Maintenance dose - 10 ml of product per 1 m3 of water. Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT SPA - BRIGHTENER Extra The product provides crystal clear water and eliminates microscopic impurities. Use of the product: Microscopic (colloidal) impurities are deposited or present in the water, which deteriorate the hygienic quality of the water and its transparent appearance. The particles coat bacteria and viruses and they better resist disinfection. By flocculation (conversion of impurities into a separable form), the said colloidal particles are removed from the water with the help of sedimentation and filtration, and thus the water in the whirlpool becomes clear. Method of use: The product is used as a preventive measure to prevent clouding of the water or to remove impurities that have already arisen. Once larger clumps have formed, they can be filtered or suctioned from the bottom of the hot tub. Dosage: When the water is cloudy, 3-6 ml / 1 m3 of water. Always follow the information on the product label.

HANSCRAFT SPA - Hardness regulator The product is designed to stabilize water hardness. Use of the product: In the case of hard water (above 18 °N, German scale) or an increased content of heavy metals in the water (local source - well), dissolved calcium, magnesium and other salts are excreted from the water, on which impurities are packed and a suitable ground for the growth of bacteria, algae and viruses is created. The hardness regulator acts as an inhibitor of water hardness, prevents the formation of deposits on the walls and bottom of hot tubs, and at the same time binds calcium, magnesium, iron and manganese ions. Method of use: The preparation is dosed when filling the hot tub and also every time it is refilled. Dosage: When filling the hot tub, 25-50 ml of product per 1 m3 of water (depending on hardness). During regular operation (when adding water), the dose is 25-50 ml of product per 1 m3 of fresh water. Always follow the information on the product label.

HANSCRAFT SPA - Chlorine MINI tablets 20g MINI tablets serve as a disinfectant for all-season water maintenance in the hot tub. Prevents the formation of algae and bacteria. How to use the product: Always adjust the pH value to 6.8-7.6 before using the mini tablets for the first time. Then dose the tablets with a skimmer, float or other dispenser with the filtration switched on. It is necessary to maintain the content of active chlorine in the range of 0.3-0.8 mg/l and the pH in the range of 6.8-7.6. Check the chlorine content and the measured pH once a week with a drop or strip tester. Dosage: Depending on the water temperature, add 1 tablet (20 g) per 1 m3 of water (1,000 l) every 6-8 days or depending on the intensity of use of the hot tub. Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT SPA - MULTI MINI tablets 3 in 1 Multifunctional 20g tablets are intended for regular disinfection of water in multi-purpose hot tubs - they ensure disinfection, prevent the formation of algae, remove impurities using flocculation. Use of the product: The 3-in-1 preparation provides disinfection of water using slowly releasing chlorine, prevention against the formation of algae, and helps to remove microscopic impurities using flocculation. Using this 20g tablet, you can treat the water in a hot tub of approx. 1 m3 size for 6-8 days under normal conditions or according to the intensity of use of the hot tub. Method of use: The tablet is dispensed into the skimmer, it must not come into direct contact with the acrylic, the wall or the bottom of the whirlpool to avoid discolouration. Dosage: With regular operation, 1 tablet per 1 m3 of water every 6-8 days. Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT SPA - MULTI MINI tablets 6 in 1 Multifunctional 20g tablets is a modern multipurpose preparation for all-season ongoing maintenance of water in all types of hot tubs. Eliminates bacteria and algae, prevents their growth, enables flocculation of impurities, stabilizes active chlorine and water hardness, clarifies (improves filtration efficiency). Use of the product: The 6-in-1 preparation provides disinfection of water using slowly releasing chlorine, prevention against the formation of algae, and helps remove microscopic impurities using flocculation. Using this 20g tablet, you can treat the water in a hot tub of approx. 1 m3 size for 6-8 days under normal conditions or according to the intensity of use of the hot tub. Method of use: The tablet is dispensed into the skimmer, it must not come into direct contact with the acrylic, the wall or the bottom of the whirlpool to avoid discolouration. Dosage: With regular operation, 1 tablet per 1 m3 of water every 6-8 days. Always follow the information on the product label. Use biocides in a safe manner. Always read the label and product information before use.

HANSCRAFT SPA - pH minus / granulate Preparation for adjusting the pH values ​​of the water in the hot tub - reduction. Use of the preparation: For the greatest effect of chlorine without side effects, it is necessary to adjust the pH value of the water to 6.8 - 7.6. At values ​​above 7.6, turbidity may occur in the water, which will subsequently cause filter clogging. Furthermore, the effectiveness of disinfectants may decrease, you can smell a strong chlorine smell, and irritation of the eyes and skin may occur. In this case, it is necessary to use the product HANSCRAFT SPA pH minus to treat the water and reduce the pH value. How to use: The product is dissolved in water and poured into the hot tub with the filter device turned on, and it reduces the pH value. The pH must be checked at least once a week using a test kit. Dosing: To reduce the pH value by 0.2, dose 15 g / 1 m3 of water (1 level tablespoon). Always follow the information on the product label.

HANSCRAFT SPA - pH plus / granulate Preparation for adjusting the pH values ​​of the water in the hot tub - increase. Use of the product: The recommended pH value of the water in the hot tub is in the range of 6.8 - 7.6. In this range, the greatest effect of chlorine is given without side effects. The pleasant sensation when bathing, the correct function of the device, etc. depends on the pH value. The pH must be checked at least once a week using a test kit. At a pH below 6.8, there may be increased metal corrosion, fading of the colors of the hot tub, as well as eye and skin irritation. Method of use: The product is dosed to increase the pH value to the range of 6.8 - 7.6. After dissolving in the container, it is dosed directly into the hot tub with the filter device turned on. level tablespoon). Always follow the information on the product label.

CHEMISTRY FOR Whirlpools SPA - Whirlpool set profi 2 Affordable complete package of chemistry for whirlpool baths Package Contents: HANSCRAFT SPA pH minus - reduces the pH values of the spa water HANSCRAFT SPA pH plus - increases the pH values of the water in the whirlpool HANSCRAFT SPA MULTI MINI tablets 3 in 1 - multifunctional tablets 20g: disinfection, against algae growth, clear water HANSCRAFT SPA SPRAY CLEANER - cleaning spray for cleaning the hot tub before use HANSCRAFT SPA CLARIFIER Extra - provides crystal clear water and eliminates microscopic impurities HANSCRAFT SPA ALGI SPA - reduces the pH values of the spa water HANSCRAFT Droplet Tester Use biocides in a safe manner. Always read the label and product information before use. Always follow the information on the product label "Use biocides in a safe manner. Always read the label and information before use about the preparation."

HANSCRAFT SWIMMING POOL - FLOKER Extra The product provides crystal clear water. Use of the product: Microscopic (colloidal) impurities are deposited or present in the water, which deteriorate the hygienic quality of the water and its transparent appearance. The particles coat bacteria and viruses and they better resist disinfection. By flocculation (conversion of impurities into a separable form), the said colloidal particles are removed from the water with the help of sedimentation and filtration, and thus the pool water becomes clear. Method of use: The product is used as a preventive measure to prevent clouding of the water or to remove impurities that have already arisen. Once larger clumps have formed, they can be filtered or suctioned from the bottom of the pool. Dosage: When the water is cloudy, 3-6 ml/m3 of water. Always follow the information on the product label.