Filtrační nádoba Handscraft

Písková filtrace HANSCRAFT TOP MASTER 400Pískové filtrace řady TOP MASTERTM jsou tvořeny nádobou z polymerního tvrzeného HDPE materiálu, který zaručuje extrémně dlouhou životnost. Horní difusor zajišť.

Sand filtration HANSCRAFT GECCO SIDE 775 GECCO filtrations were developed based on the requirements for higher pressure while improving all parameters compared to standard filters. They are made of high density HDPE and molded in one piece. You won't find any welds on this filter container! Technical information unique locking of the upper part of the valve in one piece simple installation with no tools required equipped with SIDE side 6-way valve equipped with a pressure gauge maximum operating pressure 40 psi /2.8 bar/ 2.8 kg/cm² maximum temperature 50 °C (122 °F) recommended media grain size: 0.5–0.8 mm equipped with ABS materials the package includes all fittings and a waste sight glass

GECCO filters were developed based on the requirements for higher pressure while improving all parameters compared to standard filters. They are made of high-density HDPE and from a mold in one piece. You won't find any welds on this filter container! Technical information: unique top valve locking simple installation pressure gauge screw fitting + waste sight glass maximum flow rate 23.5 m3/hour maximum operating pressure 40 psi/2.8 bar connection to 63 mm recommended sand grain size 0.5 - 0.8 mm maximum temperature 50°C

Sand filtration HANSCRAFT GECCO TOP 875 GECCO filtrations were developed based on the requirements for higher pressure while improving all parameters compared to standard filters. They are made of high density HDPE and molded in one piece. You won't find any welds on this filter container! Technical information • unique locking of the upper TOP valve in one piece • simple installation without the need for tools • equipped with a TOP 6-way valve • equipped with a pressure gauge • maximum operating pressure 40 psi/2.8 bar/ 2.8 kg/cm² • maximum temperature 50 °C (122 °F) • recommended grain size of the medium: 0.5 – 0.8 mm • equipped with ABS materials • the package includes all fittings and a waste sight glass

Sand filtration HANSCRAFT GEL - PRO 75 GEL - PRO filtration are made of strong polyester fiberglass with an excellent gel-coat treatment and a single layer inside made of polyester resin and glass fiber. They are ideal for private pools with high demands on filtering quality and long life Technical information – unique locking of the top of the valve in one piece – simple installation without the need for tools – equipped with a SIDE side six-way valve – equipped with a pressure gauge – maximum operating pressure 36 psi /2.5 bar – maximum temperature 43 °C (109 °F) – recommended media grain size: 0.5–0.8 mm – equipped with ABS laterals – equipped with all with fittings (1x sight glass) flow rate max: 22, 1m3/hour sand: 250kg Product characteristics – container made of GEL COAT laminated surface – smooth GEL COAT finish (material for the production of ship hulls) – smooth transition of connections for smaller flow losses – transparent top cover for checking the medium – air release valve

Sand filtration SIDE MASTER 450 Sand filters of the SIDE MASTER™ series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. All filters of this series are equipped with a 6-way side valve and a control manometer. Sand filtration serves to capture impurities contained in the water. The pool water passes through a sand filter cartridge in which mechanical impurities are captured and clean water is returned to the pool. The filter station should filter 2x the volume of water in the pool in 8 hours. For heavily loaded pools or at high air temperatures, it is recommended to filter the volume of water every 3 hours. The maintenance requirements of sand filtration are minimal: the sand filling is washed as standard once a week (depending on the load of the pool), the replacement of the sand filling is sufficient once every 2 to 3 years. Sand filtration is very efficient and allows the connection of other accessories such as solar heating, heat pump and pool vacuum cleaners. Technical information: • equipped with a 6-way side valve • equipped with a pressure gauge • maximum operating pressure 28 psi/2.0 bar/ 2.0 kg/cm² • maximum temperature 40 °C (104 °F) • recommended grain size of the medium: 0.5–0.8 mm • equipped with ABS materials • the package includes all fittings and a waste sight glass • made of UV resistant material Usage: • For sweet and salty water treatment • For indoor and outdoor pools • Suitable for up to 35 m3 of water Package Contents: • Polypropylene container • 6-way side valve Technical parameters • Container material: Hardened polyethylene • Container diameter: 450 mm • Container height: 730 mm • Connection: 50 mm • Max. working pressure: 2 bar • Valve: 6-way top • Amount of filling: 45 kg • Recommended grain size: 0.5 - 0.8 mm • Flow rate: 7.5 m3/hour. • Weight: 10.2 kg

Sand filtration SIDE MASTER 500 Sand filters of the SIDE MASTER™ series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. All filtrations of this series are equipped with a 6-way side valve and its own control pressure gauge. Sand filtration is used to capture impurities contained in the water. The pool water passes through a sand filter cartridge in which mechanical impurities are captured and clean water is returned to the pool. The filter station should filter 2x the volume of water in the pool in 8 hours. For heavily loaded pools or at high air temperatures, it is recommended to filter the volume of water every 3 hours. The maintenance requirements of sand filtration are minimal: the sand filling is washed as standard once a week (depending on the load of the pool), the replacement of the sand filling is sufficient once every 2 to 3 years. Sand filtration is very efficient and allows the connection of other accessories such as solar heating, heat pump and pool vacuum cleaners. Technical information: • equipped with a 6-way side valve • equipped with a pressure gauge • maximum operating pressure 28 psi/2.0 bar/ 2.0 kg/cm² • maximum temperature 40 °C (104 °F) • recommended grain size of the medium: 0.5–0.8 mm • equipped with ABS materials • the package includes all fittings and a waste sight glass • made of UV resistant material Usage: • For sweet and salty water treatment • For indoor and outdoor pools • Suitable for up to 50 m3 of water Package Contents: • Polypropylene container • 6-way side valve Technical parameters • Container Material: Hardened Polyethylene • Container diameter: 527 mm • Container height: 770 mm • Connection: 50 mm • Max. working pressure: 2 bar • Valve: 6-way top • Filling quantity: 85 kg • Recommended grain size: 0.5 - 0.8 mm • Flow rate: 10.8 m3/hour. • Weight: 12.8 kg

Sand filtration SIDE MASTER 650 Sand filters of the SIDE MASTER™ series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. All filters of this series are equipped with a 6-way side valve and a control manometer. Sand filtration serves to capture impurities contained in the water. The pool water passes through a sand filter cartridge in which mechanical impurities are captured and clean water is returned to the pool. The filter station should filter 2x the volume of water in the pool in 8 hours. For heavily loaded pools or at high air temperatures, it is recommended to filter the volume of water every 3 hours. The maintenance requirements of sand filtration are minimal: the sand filling is washed as standard once a week (depending on the load of the pool), the replacement of the sand filling is sufficient once every 2 to 3 years. Sand filtration is very efficient and allows the connection of other accessories such as solar heating, heat pump and pool vacuum cleaners. Technical information: • equipped with a 6-way side valve • equipped with a pressure gauge • maximum operating pressure 28 psi/2.0 bar/ 2.0 kg/cm² • maximum temperature 40 °C (104 °F) • recommended grain size of the medium: 0.5–0.8 mm • equipped with ABS materials • the package includes all fittings and a waste sight glass • made of UV resistant material Usage: • For sweet and salty water treatment • For indoor and outdoor pools • Suitable for up to 70 m3 of water Package Contents: • Polypropylene container • 6-way side valve Technical parameters • Container Material: Hardened Polyethylene • Container diameter: 627 mm • Container height: 850 mm • Connection: 50 mm • Max. working pressure: 2 bar • Valve: 6-way top • Filling quantity: 145 kg • Recommended grain size: 0.5 - 0.8 mm • Flow rate: 15.8 m3/hour. • Weight: 19.5 kg

Sand filtration SIDE MASTER 700 Sand filters of the SIDE MASTER™ series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. All filters of this series are equipped with a 6-way side valve and a control manometer. Sand filtration serves to capture impurities contained in the water. The pool water passes through a sand filter cartridge in which mechanical impurities are captured and clean water is returned to the pool. The filter station should filter 2x the volume of water in the pool in 8 hours. For heavily loaded pools or at high air temperatures, it is recommended to filter the volume of water every 3 hours. The maintenance requirements of sand filtration are minimal: the sand filling is washed as standard once a week (depending on the load of the pool), the replacement of the sand filling is sufficient once every 2 to 3 years. Sand filtration is very efficient and allows the connection of other accessories such as solar heating, heat pump and pool vacuum cleaners. Technical information: • equipped with a 6-way side valve • equipped with a pressure gauge • maximum operating pressure 28 psi/2.0 bar/ 2.0 kg/cm² • maximum temperature 40 °C (104 °F) • recommended grain size of the medium: 0.5–0.8 mm • equipped with ABS materials • the package includes all fittings and a waste sight glass • made of UV resistant material Usage: • For sweet and salty water treatment • For indoor and outdoor pools • Suitable for up to 90 m3 of water Package Contents: • Polypropylene container • 6-way side valve Technical parameters • Container Material: Hardened Polyethylene • Container diameter: 705 mm • Container height: 960 mm • Connection: 50 mm • Max. working pressure: 2 bar • Valve: 6-way top • Amount of filling: 210 kg • Recommended grain size: 0.5 - 0.8 mm • Flow rate: 19.6 m3/hour. • Weight: 22.5 kg

Every pool requires a reliable pool pump and sand filtration for good water circulation and cleanliness. With our filter range, you can be sure of the highest quality that your pool deserves. With the help of the latest technology, HANSCRAFT guarantees high operational quality, minimal care and easy maintenance of the equipment. Our entire line of filter units and complex filter systems, including the pump, is made of anti-corrosion materials and thermoplastic. The principle of sand filtration consists in pressure filtering the water through the sand, which creates thousands of channels where the water seeps and then returns cleaned back to the pool circuit. Over time and with the use of the pool, the filter channels become clogged and it is necessary to carry out the so-called "flushing" and "filtering", whereby the filtering function of the device is restored again. The whole procedure takes no more than a few minutes. Sand filters of the TOP MASTER™ series are equipped with a container made of polymer hardened HDPE material, which guarantees an extremely long service life. The upper diffuser ensures an even distribution of water over the upper part and guarantees a perfect filtering function. All filters of this series are equipped with a 6-way valve and a control manometer that monitors the working pressure and warns of the need for service or flushing of the filter container. All sand filters have a common connection to technology with an internal diameter of 50 mm. Characteristics: Made of durable HDPE polymer 6-way valve with simple control Application for all types of residential pools and hot tubs The valve and vessel connection is 360° rotatable to simplify installation Easy-to-use water outlet from filtration Ecologically and health-friendly View of the waste connection Control pressure gauge Operating parameters: Maximum flow rate: 4.32 m3/h Filter container diameter: 350 mm Filtration height: 726 mm Filtration connection: 50 mm Maximum operating pressure: 200 kPa / 28 psi / 2.0 bar Factory pressure tested: 300 kPa / 44 psi / 3.0 bar Filter medium: 20 kg / 0.5-0.8 mm Ma

Sand filtration HANSCRAFT TOP MASTER 450 Sand filters of the TOP MASTERTM series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. The upper diffuser ensures an even distribution of water over the upper part and ensures a perfect filtering function. All filters of this series are equipped with a 6-way valve and a control manometer. Technical data: - Area: 0.16 m2 - Connection: 50 mm - Flow rate 7.8 m3/h - Sand: 45 kg - Dimensions: A 814 mm, B 698 mm, C 638 mm, D 210 mm, E 449 mm, F 390 mm Information: - Choice of base (Basic #1, Combo #2) - Equipped with a TOP 6-way valve - Equipped with pressure gauge - Maximum operating pressure 28 psi/2.0 bar/2.0 kg/cm2 - Maximum temperature 40 oC (104 oF) - Equipped with ABS laterals - The recommended grain size of the medium is 0.5-0.8 mm - The package includes all fittings and a waste sight glass - Made of UV resistant material

Sand filtration HANSCRAFT TOP MASTER 500 Sand filters of the TOP MASTERTM series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. The upper diffuser ensures an even distribution of water over the upper part and ensures a perfect filtering function. All filters of this series are equipped with a 6-way valve and a control manometer. Technical data: - Area: 0.22 m2 - Connection: 50 mm - Flow rate 10.8 m3/h - Sand: 85 kg Dimensions: A 845 mm, B 730 mm, C 670 mm, D 235 mm, E 527 mm, F 500 mm Information: - Choice of base (Basic #1, Combo #2) - Equipped with a TOP 6-way valve - Equipped with pressure gauge - Maximum operating pressure 28 psi/2.0 bar/2.0 kg/cm2 - Maximum temperature 40 oC (104 oF) - Equipped with ABS laterals - The recommended grain size of the medium is 0.5-0.8 mm - The package includes all fittings and a waste sight glass - Made of UV resistant material

Sand filtration HANSCRAFT TOP MASTER 650 Sand filters of the TOP MASTERTM series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. The upper diffuser ensures an even distribution of water over the upper part and ensures a perfect filtering function. All filters of this series are equipped with a 6-way valve and a control manometer. Technical data: - Area: 0.31 m2 - Connection: 50 mm - Flow rate 15.3 m3/h - Sand: 145 kg Bookmark- Dimensions: A 950 mm, B 835 mm, C 775 mm, D 300 mm, E 627 mm, F 500 mm Information: - Choice of base (Basic #1, Combo #2) - Equipped with a TOP 6-way valve - Equipped with pressure gauge - Maximum operating pressure 28 psi/2.0 bar/2.0 kg/cm2 - Maximum temperature 40 oC (104 oF) - Equipped with ABS laterals - The recommended grain size of the medium is 0.5-0.8 mm - The package includes all fittings and a waste sight glass - Made of UV resistant material

Sand filtration TOP MASTER 700 Sand filters of the TOP MASTER™ series are made of a container made of polymer hardened HDPE material, which guarantees an extremely long service life. The upper diffuser ensures an even distribution of water over the upper part and ensures a perfect filtering function. All filters of this series are equipped with a 6-way valve and a control manometer. Sand filtration serves to capture impurities contained in the water. The pool water passes through a sand filter cartridge in which mechanical impurities are captured and clean water is returned to the pool. The filter station should filter 2x the volume of water in the pool in 8 hours. For heavily loaded pools or at high air temperatures, it is recommended to filter the volume of water every 3 hours. The maintenance requirements of sand filtration are minimal: the sand filling is washed as standard once a week (depending on the load of the pool), the replacement of the sand filling is sufficient once every 2 to 3 years. Sand filtration is very efficient and allows the connection of other accessories such as solar heating, heat pump and pool vacuum cleaners. Technical information: • choice of base (Basic, Combo (with base also for filter pump) • equipped with a TOP 6-way valve • equipped with a pressure gauge • maximum operating pressure 28 psi/2.0 bar/ 2.0 kg/cm² • maximum temperature 40 °C (104 °F) • recommended grain size of the medium: 0.5–0.8 mm • equipped with ABS materials • the package includes all fittings and a waste sight glass • made of UV resistant material Usage: • For sweet and salty water treatment • For indoor and outdoor pools • Suitable for up to 90 m3 of water Package Contents: • Polypropylene container • 6-way TOP valve Technical parameters • Container material: Hardened polyethylene • Container diameter: 700 mm • Container height: 1020 mm • Connection: 50 mm • Max. working pressure: 2 bar • Valve: 6-way top • Amount of filling: 210 kg • Recommended grain size: 0.5 - 0.8 mm • Flow rate: 19.6 m3/hour. • Weight: 22.8 kg