Testery a testovací média

Test strips 2 in 1 2 in 1 test strips These strip testers can be used to test the pH value, i.e. acidity or alkalinity and the amount of Chlorine. The package contains 50 pcs of strips .

Water quality testers AquaChek tester 7 in 1 Aquachek tester 7 in 1 - 50 strips Aquachek test strips 50 pcs Thanks to this Aquachek 7 in 1, you can measure in one second: Total water hardness Total chlorine Total bromine Free chlorine pH Total alkalinity Cyanuric acid (stabilizer) The package contains: 50 test strips A color scale for comparison in composite form AquaChek Select is ideal for those who want more data to analyze their pool or hot tub water. Get 7 important results on one test! Place the AquaChek in your hot tub or pool for one second and immediately remove from the water. You have your results in seconds! To keep your hot tub or pool clean and fresh, test the pool water each time at both ends of the pool (this is not necessary in the case of a hot tub) - but twice a week! In the case of hot tubs, we recommend always testing before and after use. We also recommend carefully recording the results of your test after each measurement.

The product has expired, it does not affect the functionality. Water quality testers AquaChek tester Bromid AquaChek tester Sodium Bromide Tester for swimming pools (or hot tubs) that use Sodium Bromide generators The AquaChek Sodium Bromide tester (Sodium Bromide test) allows you to measure the Bromide value in pool water with greater accuracy than standard testers. It takes three to five minutes to get the right results here. To maintain the correct values ​​in the pool water, test at both ends of the length of the pool at least once or twice a week. In the case of use in whirlpools - hot tubs, it is good to repeat the tests before and after using the spa. We recommend clients to write down the test values. The package contains 10 strip testers

The product has expired, it does not affect the functionality. Water quality testers Aquachek TDS tester AquaChek total dissolved solids test RECOMMENDED FOR WHIRLPOOL BATHS! AquaChek TDS (Total Dissolved Solids) tester - test strips for total dissolved solids Total dissolved solids are a measure of everything that has been dissolved in the water over the time the chemicals have been added. High TDS contributes to turbid/cloudy water, misbalances the correct ratio of chemicals and generally increases chlorine consumption, which adds to the cost. Test your hot tub and see if it is time to drain the water and fill the hot tub with fresh water. The test really takes a while - it takes a few seconds. Immerse the strip in the water and then pull it out, immediately compare it with the scale and you will know the immediate result of draining the hot tub or not. Test at least once a week! The package contains 25 test strips

Tester designed to identify the amount of copper in pool water

Spare test tablets designed for DPD testers to determine the pH value in pool water

Spare test tablets intended for DPD testers to determine the value of total chlorine in pool water

A simple and economical way to test water quality that provides accurate results for seven basic water parameters. The tester works independently and stores the last 20 results for each parameter (no app needed) Waterproof IP - 67 and floats Measured parameters and their range: Free chlorine: 0.00 - - 12.0 ppm Combined chlorine: 0.00 - - 12.0 ppm Total chlorine: 0.00 - - 12.0 ppm pH: 6.4 - - 8.4 Total alkalinity: 10 - - 200 ppm Total bromine: 0.00 - - 17.0 ppm Copper: 0.00 - - 8.0 ppm In addition to the tester itself, the package includes 6 test strips from each reagent: free chlorine (DPD - 1) Combined chlorine (DPD - 3) pH total alkalinity total bromine Copper

Simple and accurate measurement of 34 parameters. & nbsp;

Used to measure chlorine values, pH pool water

Exact EZ / Exact IDIP - 60 measurements

Exact IDIP - 25 measurements

Exact IDIP - 50 measurements

Exact EZ / Exact IDIP - 100 Measurements

Spare test tablets designed for DPD testers to determine the value of chlorine in pool water.

Spare test tablets intended for DPD testers to determine the value of the oxy in the pool & nbsp; water.

Used to measure the values ​​of oxygen and the pool water pH

Tablet tester "

Tablet tester & nbsp; DPD in orange case, to determine chlorine/pH values ​​in pool water

Used to measure chlorine values, pH pool water